Tenants are responsible for reducing the risk of fires starting and to help ensure a safe escape.

  • All hallways and any access to an exit must be clutter and garbage free and unobstructed at all times.
  • Furnace filters should be clean and changed regularly.
  • Keep smoke alarms in good working condition and vacuum them regularly.
  • Keep carbon monoxide alarms in good working condition and vacuum them regularly.
  • Keep your home generally clean and tidy.
  • Check that appliances do not have grease build-up.
  • Avoid storage in furnace rooms, and away from furnaces and water heaters.
  • Keep dryer vents free of lint and check the dryer duct at least every 6 months for lint accumulations inside the duct.
  • Do not use extension cords as permanent power connections. Power bars are permitted.
  • Never overload electrical circuits.
  • Ensure that exit doors open easily without the use of a key.
  • Never store flammable liquids or propane tanks inside of a building.

Detection Responsibilities

The Ontario Fire Code requires that every place of residence have smoke alarms installed and kept in working condition. Smoke alarms are very important for the safety of you and your neighbours by giving early warning of fire. Your landlord is responsible for installing smoke alarms and keeping them in working condition, including testing, repairs and replacement as necessary. Your landlord must also act to correct any problem or concern you report about the operation of your smoke alarm.

The Fire Code specifies that "no person shall disable a smoke alarm." A tenant or any other person who disables a smoke alarm is guilty of a provincial offence and may be subject to a fine of up to $50,000.  

For your protection, you are encouraged to take part in ensuring that the smoke alarms are operational and to co-operate with the landlord in carrying out the necessary testing and maintenance. Tenants must notify the landlord:

  • when the low battery signal is activated (on battery-operated smoke alarms only) and make arrangements for replacement of the battery.
  • if the "power on" indicator goes out (on electrically wired smoke alarms only) and arrange for appropriate repairs.
  • if the smoke alarm is damaged and make arrangements for the repair or replacement of the unit.
  • of any electrical problems that may affect the operability of electrically wired smoke alarms.